All Categories
enEN
Industry Information

Home / News & Event / Industry Information

The operation process of the syringe pump

Mar.24.2023

The operation process of the syringe pump

I believe that everyone has experience with drips. For example, if you have a cold for a long time, you can go to the hospital for drips for treatment. Under normal circumstances, it is very simple for everyone to get drips, and no other equipment is needed. Cooperate with each other, but for some special patients, such as infants, the general drip method is irrelevant, and the assistance of the infusion pump is needed at this moment. The following will introduce the correct application steps of the intravenous  infusion pump.

I firmly believe that everyone has personally experienced bits and pieces. For example, if you have a fever and a cold for a long time, you can go to the hospital for drip treatment. In all normal cases, the IV drip is very simple and does not require the cooperation of other equipment. But for some unique patients, such as infants, the general intravenous drip method is useless, and now requires the assistance of an infusion pump. The following is a detailed introduction to the appropriate use steps of the intravenous infusion pump.

Intravenous syringe pump  using steps:

To master the main purpose of the infusion pump. The infusion pump is an auxiliary software that accurately injects medicine into the human body. It is the most ideal medical device for continuous drip work. Proper operation and use of the vaporization pump can not only accurately give different infusion rates according to the different physical conditions of patients, but also greatly reduce the workload of medical staff, making the diagnosis and treatment work more accurate and reasonable development to achieve the best level of treatment and care.

Master the main uses of infusion pumps. The infusion pump is an auxiliary software for accurately infusing medicinal liquid into the human body, and it is the most ideal medical device for continuous intravenous infusion. The correct actual operation and application of vaporization pumps can not only accurately give different drug delivery rates according to the different physical fitness of patients, but also greatly reduce the workload of medical staff, so that diagnosis and treatment can be carried out more accurately and reasonably, and achieve the best results. standard of care and medical care.

The structure of the infusion pump includes a microcomputer system, pump equipment, monitoring system and alarm equipment. The microcomputer system of the infusion pump is controlling and solving all systems; the pump equipment is the power device for dripping liquid; the key of the monitoring system is to send data signals of different magnetic induction intensities to the microcomputer system. The alarm system is mainly manifested in two ways: light alarm and sound alarm when the computer sends out instructions.

Give everyone a detailed introduction to the operation steps of the infusion pump. First fix the infusion pump on the infusion stand, and turn on the power supply. Then open the pump door, put the liquid delivery pipe at the lower end of the burette on the buckle of the infusion pump installed from top to bottom at the appropriate position, watch the pump door, and open the screw clamp of the syringe. Then turn on the power button on the back of the infusion pump, select the syringe, set the drip volume, ribbon and drip rate per minute. Press the "Start" button to start the drip, and press the "Stop" button to stop the drip after the drip is finished. Finally, open the pump door, remove the liquid delivery pipe and close the pump door. Turn off the main power switch and unplug the power cord. This is all the operation steps of the infusion pump.

Introduce the operation steps of the infusion pump in detail. First fix the infusion pump on the infusion stand, and switch on the switching power supply. Then open the pump door, place the infusion tube at the lower end of the buret on the buckle installed from top to bottom of the infusion pump at a suitable position, appreciate the pump door, and open the screw clamp of the syringe. Then turn on the switch power button on the back of the infusion pump, select the syringe, and set the drip volume, ribbon and drip speed per minute. Press the "Start" button to start the IV drip, then press the "Stop" button to stop the IV drip. Finally, open the pump door, remove the liquid delivery tube, and close the pump door. Turn off the main power switch and unplug the power cord. Here are all the operating steps of the infusion pump.

Finally, the operation method of the infusion pump is introduced in detail. Pay attention to the specific method when using the infusion pump, such as using a special dropper for the infusion pump, pay attention to the discharge of air when connecting the liquid, and clamp the hose. When starting an IV, remember to check that the IV is done correctly. Finally, when the fluid delivery line is removed, switch power should be terminated before the infusion pump is scrubbed for placement and retention. If the infusion pump is not used for a long time, the battery needs to be charged once a week.

Have Questions about Arshine Lifescience?

Our professional sales team are waiting for your consultation.

GET A QUOTE