All Categories
enEN
Operation Lamp

Home / Products / Operation Room & ICU / Operation Lamp

CHGLED700/500 LED SURGICAL SHADOWLESS LAMP
CHGLED700/500 LED SURGICAL SHADOWLESS LAMP

CHGLED700/500 LED SURGICAL SHADOWLESS LAMP

Product Brochure:DOWNLOAD

  • Introduction
Introduction

1. Extra-long service life:

A novel LED cold light source is used to extend the service life to up to 60,000 hours with no need to change beads. It’s superior to traditional halogen lamps and can meet the requirements of energy saving and environmental protection.

2. Perfect cold light effect

The spectrum of the novel LED cold light source used contains no ultraviolet or infrared lights, which brings neither heat nor radiation, and the temperature rises at the physician’s head and the surgical wound area ≤1℃, with almost no temperature rises.

3. Ideal appearance design in line with purification requirements:

The fully enclosed and streamlined lamp head design conforms to the design principle of aerodynamics, which thoroughly eliminates the dead corners of the flow in the purified air and meets the high-standard laminar requirements in modern operation rooms and is conducive to the aseptic requirements in operating rooms;

4. Humanized interface design:

The lighting brightness can be changed according to the hospital's need for different surgical lighting. Optional novel LED touch-screen LCD control panel is available for the turn-on/off and adjustment of illuminance, color temperature and brightness.

5. Ultra-strong deep lighting, perfect non-shadow effect:

The integral design of LED lamp head makes the light beams converge into a high-brightness uniform light column to ensure a soft and even deep beam-converging effect and the lighting need for high brightness and depth.

6. Color temperature adjustment function:

The color temperature of the Model CHGLED700/500 surgical shadowless lamp can be adjusted from 3500K to 5000K in six levels, which makes the diagnosis more accurate and will not cause eye fatigue of the medical staff due to long hours of work.

7. Good hanging system:

Lightweight high-quality suspension system with balance arm; six sets of universal joints are linked to enable light and 360° all-direction movement with accurate positioning to meet the needs of different heights, angles and positions during surgery.

8. Exquisitely structured focusing system:

The manual focusing technology enables simple and convenient operations and solves the technical difficulties in focusing of LED surgical shadowless lamps to realize non-grade focusing; detachable handle; can be sterilized at a high temperature (≤160°C); unique one-key mode for endoscope.

9. Bright and uniform lighting:

The light beams emitted by the LED light source go through a specially-designed high-performance lens and then converge on the surgical area to form a light field which meets the need of surgical lighting; the max. illuminance is up to 160,000 LUX. The brightness of the LED is adjusted in a non-grade digital way and the illuminance of each lamp can be adjusted separately.

10. Extremely low fault rate:

Each LED module contains 6-10 LED beads. Since each module has an independent electronic control system, the fault rate of the lamp head is very low and the fault of a single LED won’t affect the functions of the lamp head.

11. Low heat generation:

The greater advantage of LED is that it produces less heat, because it hardly emits infrared or ultraviolet rays.

12. Internal Camera System

The advanced camera systems from the manufacturer of professional camera systems, Hikvision (systems from other brands also can be used according to client needs) are adopted to ensure the functionality and practicability of the device. The camera is installed at the disinfection handle of the primary or secondary lamp head, the angle is adjustable and the angle is adjustable without dead ends.

13. Technical parameters of surgical shadowless lamp and camera system:

Surgical Shadowless Lamp   CHGLED700/500    Shadowless lamp with internal camera system
No. of LED beads 80/48
Illuminance (Lux) 60000 - 160000/60000 - 160000
Color temperature (K) 3500 - 5000 adjustable/3500 - 5000 adjustable
Diameter of light spot (mm) 160-280
Dimming system Continuous dimming system
Color rendering index ≥96
Lighting depth (mm) ≥1200
Temperature rises at operator’s head (℃) ≤1
Temperature rises at operating field area (℃) ≤2
Color rendering index (CRI) ≥96
Color rendition index ≥97
Mains voltage 220V/50Hz
Input power (VA) 400
Lowest/optimum installation height 2.8m/3.2m
Model/Parameters

10X up to4.35 million 1/2.8" CMOS

HD operating field chip

Camera
Type of sensor 1/2.8" Progressive Scan CMOS
Scanning system Line-by-line scan
Signal system PAL/NSTC
Video output SDI output Network output
Resolution

50HZ:50fps(1920X1080) 60HZ:60fps(1920X1080)

50HZ:25fps(1920X1080) 60HZ:30fps(1920X1080)

Lowest illuminance Colorful: 0.05Lux @ (F1.6,AGC ON)
S/N-ratio >52dB
Lens
Focus length 4.7-47Mm, 10x optical zoom
FNO F1.6-F3.0
Horizontal field of view 58.6-6.4° (wide angle - telescope)
Minimum photographic distance 120mm - 800mm (wide angle - telescope)
Parameters setting
Focusing mode semi-automatic/automatic/manual/
Exposure mode Automatic exposure/aperture priority/shutter priority/manual exposure
Electronic shutter 1/1s - 1/30,000s
White balance Automatic 1/automatic 2/indoor/outdoor/manual/ sodium lamp/fluorescent lamp
Gain 16-level adjustable
Wide dynamic OFF/ON, 15-level adjustable
Digital noise reduction 3D
Lens initialization Internal
Image quality adjustment Brightness, contrast, sharpness and saturation adjustable
Digital zoom 10
Interface function
External interface SDI, RS485, power supply, UART
External communication Pelco P, Pelco D, VISCA
General regulations
Power supply DC12V ± 25%
Working temperature and humidity -10℃ - 60℃,<90%RH
Power consumption 5W
Dimension 43.5*45.4*68.8mm
Weight 190g
Display screen Resolution 1920×1080/60Hz
Dimension 22 in.
Display type LED back light
Visible area 476.64mm×268.11mm
Visible angle Horizontal 170°, vertical 160°
Video & audio input Local video input 1 channel 3G-SDI, resolution: 1920×1080/60Hz, 1280×720/60Hz
Network video input 4 channels, resolution:1920×1080/30Hz
Audio input 1 channel, dual-track, 3.5mm interface
  1 channel HDMI 2.0,
Output HDMI output Resolution: 3840×2160/30Hz, 2560×1440/60HZ, 1920×1080/60Hz, 1280×1024/60Hz,
1280×720/60Hz, 1024×768/60Hz
VGA output 1 channel, resolution: 1920×1080/60Hz, 1280×1024/60Hz, 1280×720/60Hz, 1024×768/60Hz
Audio output 1 channel, 3.5mm interface (or speaker audio output)
2 channels, Stereo (speaker)
Video & audio coding and decoding Video compression standards H.265/H.264
Video coding resolution 1080P, 720P, WD1, 4CIF, VGA, CIF, QVGA;
Video code rate 32Kbps - 16Mbps
Video frame rate 1 frame - 60 frames
Code Code stream type Composite stream/video stream, support triple-code stream
Audio compression standard AAC
Audio code rate Audio code rate: 128kbps; sampling rate: 48kHz
Storage SATA interface 1 , 2.5-inch disk, 1TB hard disk by default, compatible with 2.5-inch SSD
External interface network interface 1 , RJ-45 10M/100M/1000M Adaptive Ethernet interface
USB interface 2 , 1 USB 3.0, 1 USB 2.0
Serial interface 1 , RS-485 serial interface, half-duplex
Others Power supply External adapter (input voltage: 12V)
Power consumption (with hard disk) ≤40W
Working temperature 0℃ - 40℃
Working humidity 10% - 90%
Device dimensions Without base: 510mm (W) X 318mm (H)
With base: 510mm (W) X 385mm (H)
Hole site for wall hanging 100mm×100mm
Screw thread for wall hanging M4
Weight (with hard disk) approx. 5kg

RELATED PRODUCT

Have Questions about Arshine Lifescience?

Our professional sales team are waiting for your consultation.

GET A QUOTE